National Instruments 12-Bit 200 MS/s Digitizer, NI PXI/PCI-5124 specifications

NI PXI/PCI-5124 Specifications

This document lists the specifications for the NI PXI/PCI-5124 (NI 5124)

high-speed digitizer. Unless otherwise noted, these specifications are valid

for the following conditions:

• All filter settings

• All impedance selections

• Sample clock set to 200 MS/s using onboard clock

Typical values are representative of an average unit operating at room

temperature. Specifications are subject to change without notice. For the

most recent NI 5124 specifications, visit ni.com/manuals.

To access the NI5124 documentation, including the NI High-Speed

Digitizers Getting Started Guide, which contains functional descriptions

of the NI512 4 signals, navigate to Start»All Programs»National

Instruments»NI-SCOPE»Documentation.

Hot Surface If the NI 5124 has been in use, it may exceed safe handling temperatures and

cause burns. Allow the NI 5124 to cool before removing it from the PXI chassis or PC.

Refer to the Environment section for operating temperatures of this device.

Vertical....................................................................................................2

Analog Input (Channel 0 and Channel 1)........................................2

Horizontal................................................................................................13

Sample Clock...................................................................................13

Phase-Locked Loop (PLL) Reference Clock...................................16

CLK IN (Sample Clock and Reference Clock Input,

Front Panel Connector).................................................................17

CLK OUT (Sample Clock and Reference Clock Output,

Front Panel Connector).................................................................17

Trigger.....................................................................................................17

Reference (Stop) Trigger.................................................................17

TRIG (External Trigger, Front Panel Connector)............................19