Appendix A Specifications
NI PXIe-1075 User Manual A-2 ni.com
Power disconnect....................................The AC power cable provides
main power disconnect. The
front-panel power switch causes
the internal chassis power supply
to provide DC power to the
CompactPCI/PXI Express
backplane. You also can use the
rear-panel D-SUB 9-pin
connector and power mode switch
to control the internal chassis
power supply. For more
information, refer to the Inhibit
Mode Switch section of
Chapter 2, Installation and
Configuration.
DC Output
DC current capacity (IMP)
Notes Maximum total power is 791 W.
The maximum power dissipated in the system slot should not exceed 140 W.
Voltage Maximum Current
+3.3 V 61 A
+5 V 56 A
+12 V 62 A
–12 V 4 A
5 VAUX 1.5 A