NI TB-2709 Installation Guide 8 ni.com
Table4 lists the National Instruments cables available for connecting the
TB-2709 to both analog and digital user signals.
Specifications
This section lists the specifications of the TB-2709. These specifications
are typical at 25 °C unless otherwise specified.

Input/Output

Refer to the documentation for your PXI-6123/6133 or PXI-6122/6132
S Series device to determine the input/output specifications for your
application.
Caution Do not apply an input voltage greater than 42Vpk/60 VDC to the TB-2709. Input
voltages greater than 42Vpk/60 VDC can damage the TB-2709 and any device connected
to it, including the host computer. Overvoltage can also cause an electric shock hazard for
the operator. National Instruments is not liable for damage or injury resulting from such
misuse.
9White/Black P0.5
10 White/Brown P0.6
11 White/Red P0.7
12 Drain Wire CHASSIS GND
13 White/Orange CTR 1 OUT
14 White/Yellow PFI 9
Table 4. TB-2709 Cabling Options
Cable Length Part Number
SMB-100, SMB Female to BNC
Female Coaxial, 50 Ω
0.6 m 763389-01
SMB110, SMB to BNC Male
Coaxial, 50Ω
1 m 763405-01
14-Pos MFIT-Pigtail Cable
Assembly
1 m 194123-01
Table 3. TB-2709 Wiring Information for 14-Pos MFIT-Pigtail
CableA ssembly (Part Number 194123-01) (Continued)
Pin Number Wire Color Signal Name