©
National Instruments Corporation 4-1 Getting Started with Virtua lBench
Chapter
4
VirtualBench-DSA
In Windows 3.1x, you launch VirtualBench-DSA (Dynamic Signal
Analyzer) by double-clicking on the DSA icon in the VirtualBench
program group. In Windows 95/NT 4.0, you launch VirtualBench-DSA
by selecting Start»Programs»VirtualBench»VirtualBench-DSA.
Front Panel Features
The front panel of VirtualBench-DSA has the following features:
•Display Settings Control—provides individual control of the
measurements being performed on Display 1 and 2. You can switch
between Display 1 and 2 by clicking on the left and right arrow
buttons above the Display Settings Control. You can select the
channels, function, magnitude/phase mode, magnitude unit,
Measurement Displays
Display 1
Display 2
Display Settings
Controls
Controls
Main Control Bar

06Chap04.fm Page 1 Friday, February 28, 1997 3:21 PM