Chapter 6 VirtualBench-DMM
Getting Started with VirtualBench 6-2
©
National Instruments Corporation
–Current AC—measures the AC component of a current
source.
–Ohms—measures resistance.
–Temperature—measures temperature.
–Diode—measures the voltage drop across a diode.
Note: Diode mode is only available when you are using the DAQCard-4050.
•Range Selector—determines the measurement range. This range is
different for each measurement mode. AutoRange mode selects the
best range to fit the input signal.
• Main Control Buttons
–Run—starts or stops the DMM acquisition.
–Single—acquires a single measurement.
–Log—enables logging.
• Math Control Buttons
–Null—selects Relative mode. When you select this button, all
subsequent measurements are made relative to the
measurement made when this button was pressed.
–Max/Min—displays the maximum and minimum values since
the button was first pressed.
–dB—displays the decibel value of your signal.
–dBm—displays the decibel power level with respect to
one mW.
–mX+B—manipulates normal display readings (X) according
to the calculation mX+B.
–%—displays the current value as a percentage of a reference.
Note: Please refer to the VirtualBench-DMM Online Help for additional help on
the front panel items.
06Chap06.fm Page 2 Friday, February 28, 1997 3:22 PM