Navini Networks 40-00292-00 manual The Screen Option Buttons The Configuration Screen

Navini Networks, Inc.	Ripwave Wireless Broadband Access Card User’s Guide
The Parameters, continued	indicate the version number of the software currently loaded in the
	“active side” and “standby side” of the Card’s flash memory. The
	two letters in parenthesis following the release number indicate the
	type of software load. JD indicates Joint Detection while EN
	indicates Enhanced Nulling.

The Screen Option Buttons

The Configuration Screen

The Trend Analysis Screen

On the left-hand side of the screen, there are five screen option buttons: Connection Status, Configuration, Trend Analysis, Statistics, and About. Each of these screens provides unique capabilities.

The Configuration screen enables you to update your Card’s software if directed to do so by your Service Provider. To access the Configuration screen, press the Configuration button.

If you must update your Card’s software, your Service Provider will provide you with instructions regarding what to do.

At the bottom of the screen is an Allow Customer Satisfaction Reporting box. This box currently is not supported on the Card.

The Trend Analysis screen lets you view Card parameters that evolve over time. With this screen, you can select up to three parameters to plot. To view the Trend Analysis screen, press the Trend Analysis button.

Page 22

060210_pv1.7_Ripwave Wireless Broadband Access Card User’s Guide_40-00292-00d(4.4.2)