Navini Networks 40-00292-00 manual Physical Characteristics, The Wireless Broadband Access Card

Navini Networks, Inc. Ripwave Wireless Broadband Access Card User’s Guide

Physical Characteristics

operate, but the Navini Diagnostics will not work. See Uninstall instructions in this Guide.

The Card fits into a standard Type II PC network interface card (NIC) slot. A 68-pin connector resides on the end of the card that is inserted into the slot.

The Wireless Broadband Access Card

68-pin connector

Depending on which model you have, one or two internal inverted- F antennas reside inside the card. The 2.5-2.6 GHz model has one internal inverted F antenna while the 3.4 and 3.5 GHz models have two internal inverted F antennas. All models also have an external antenna.

Following is a picture of the external antenna in the upright position. To raise the antenna to its upright position, raise the antenna counterclockwise. Do not turn the antenna beyond its upright position.

Page 8

060210_pv1.7_Ripwave Wireless Broadband Access Card User’s Guide_40-00292-00d(4.4.2)