![](/images/new-backgrounds/1297783/29778315x1.webp)
Navini Networks, Inc. | PMX User’s Guide |
Installing Your
PMX
The following instructions explain how to install the PMX and its driver software on your computer. Please read all instructions before attempting the installation.
NOTE: The laptop should be used preferably on a desk when the PMX is installed. Using the laptop with the PMX close to the body, such as on the lap, is undesirable.
NOTE: The screenshots shown in these instructions were taken from a laptop operating with Windows 2000. If you have a Windows XP operating system, the screens you see may vary from the screens shown in the instructions.
Step | Action | Illustration |
1.Insert the PMX into the Type II card slot on your laptop. Be sure to insert the end that has the 68- pin connector into the card slot.
2.Raise the antenna to the upright position.
3. | The Found New | Windows 2000 Screen |
| Hardware box appears |
|
| indicating the PC sees |
|
| the PMX. |
|
4. | The Welcome to the | Windows 2000 Screen |
| Found New Hardware |
|
| Wizard dialog box |
|
| appears. Click Next to |
|
| continue. |
|
Page 8