Navman 7100EU, 7000, 7100US 3-2Channel Names CH NAME, Ch Name Ring Volume Beep Volume Int Speaker

Section 3 - Radio Setup Menu (RADIO SETUP) 3-1 Radio Setup Menu (RADIO SETUP)

CH NAME

RING VOLUME

BEEP VOLUME

INT SPEAKER

WATCH MODE

WX ALERT

COM PORT

Edit or delete channel names. See Section 3-2.

Set the volume level of the incoming call notification beeps. See section 3-3.

Set the volume level of the beeps. See section 3-3.

Switch ON/OFF (on/off) the radio’s internal speakers. See section 3-4.

Selects the operation of Dual or Tri watch scanning. See section 3-5.

(Selects if the WX Alert scanning mode is ON (on) or OFF (off). (VHF 7100US only.) See section 3-6.

Select NMEA protocol for communications between the VHF radio and any other instruments. See section 3-7.

Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

3-2 Channel Names (CH NAME)

The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the option to edit or delete the channel name tags displayed on the screen.

RADIO SETUP >CH NAME

RING VOLUME BEEP VOLUME

EDIT CH NAME TELEPHONE

CH NAME 01 TELEPHONE

EDIT CH NAME PHONE1 >YES

NO

TELEPHONE >EDIT

DELETE

1.Select RADIO SETUP, then CH NAME.

2.Use + or - to step through the channels with their name tags until you see the channel name tag you want to change, then press ENT. In this example, the channel name TELEPHONE associated with channel 01 is being changed to PHONE1.

3.Select EDIT and press ENT to edit the existing name tag. Input the new name over the existing name. It can be a maximum of 12 characters.

To delete the channel name, select DELETE and press ENT.

18 NAVMAN VHF 7000, 7100US, 7100EU Operation Manual