Section 4 - DSC Setup Menu (DSC SETUP)
These DSC facilities are available only on the 7100US and 7100EU and a valid user MMSID must be entered to access the DSC functions.
4-1 DSC Setup - Menu Options
The following options are available:
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
Enter your user MMSID. See section 4.2. (If you do not have a user MMSID, see Appendix D.)
Enter or change the name and/or details of a group. See section 4.3.
Choose an automatic or manual response to calls (VHF 7100US only). See section 4.4.
Enter or change your ATIS MMSID (VHF 7100EU only). See section 4.5.
Enable/disable the ATIS function (VHF 7100EU only). See section 4.5.
Turn the DSC operation ON/OFF (on/off).
See section 4.6.
Select the type of response to an LL polling request. See section 4.7.
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change data.
4-2 Enter Your USER MMSID (USER MMSID)
This is a
DSC SETUP >USER MMSID GROUP SETUP INDIV REPLY
INPUT USER MMSID
187654321 MMSID >STORE CANCEL
USER MMSID INPUT AGAIN
You can display and read your user MMSID at any time, but you get only one opportunity to enter your user MMSID.
1.Select DSC SETUP, then USER MMSID.
2.If this is the first time that you are entering your user MMSID, a dashed line appears.
Enter your user MMSID along the dashed line. Press ENT to confirm each correct entry and to move to the next digit.
VHF 7000, 7100US, 7100EU Operation Manual | NAVMAN | 21 |
