X550 User Guide

Minimum System Requirements

Host PC

The host PC operating system can be Windows Server 2003 R2 SP2 (Standard or Enterprise Edition, 32-bit) or Ubuntu Linux. Please visit the support section of the NComputing website for the latest operating system support information.

For one X550 kit, a host PC should have at least the following:

A 2.4 GHz processor or any dual-core processor

1 GB RAM

One free full-height PCI slot

For two X550 PCI cards, a host PC should have at least the following:

A 3.5 GHz processor or an equivalent dual-core processor

2 or 3 GB RAM

Two free full-height PCI slots

Access Devices

For each XD2 access device you will need:

PS/2 keyboard

PS/2 mouse

Monitor (supporting 800x600, 1024x768, 1280x1024 or 1440x900 resolution)

Optional: speakers or headphones

Optional: USB devices and USB cables (connect directly to host PC and can be assigned to each station via the vSpace software)

Connection Cables

For each XD2 device you will need a Category 5e cable for lengths up to 5 meters or a shielded twisted pair (STP) or foil-screened twisted pair (FTP) Category 6 cable for lengths between 5 and 10 meters. All four wire pairs in the cable MUST be terminated correctly according to the Category 5e and Category 6 standards. Note that the signals being transferred across the cable are NOT Ethernet, so do not connect the PCI card or the XD2 devices to any Ethernet network equipment. Also, do NOT use Ethernet cross- over cables for the connection (cross-over cables swap wire pairs at each end).

DO NOT USE CROSS-OVER ! CABLES!

Colors should match on both ends of cable

Page 8

Page 8
Image 8
NComputing X550 manual Minimum System Requirements, Host PC