Infrastructure Mode:

Note: Before enabling the WEP function, you must obtain the WEP key (Hexadecimal code only, A~F and 0~9) used in the Access Point and then apply these codes as the WEP Key.

(1)Select 64 Bit if you have obtained a 10 number key from the Access Point; select 128 Bit if you have obtained a 26 number key from the Access Point

(2)Enter the hexadecimal codes into one of the fields marked Key 1~4. Up to 4 sets of WEP keys may be entered

Example of a 64 Bit WEP Key

Key 1

1023c2d2e5

Key 2

0000000000

 

 

Key 3

0000000000

 

 

Key 4

0000000000

 

 

Note: Unused keys MUST contain ten zeros in 64 Bit mode

Example of a 128 Bit WEP Key

Key 1 1e23c2d225b012ee29e689c123

Key 2 00000000000000000000000000

Key 3 00000000000000000000000000

Key 4 00000000000000000000000000

Note: Unused keys MUST contain twenty six zeros in 128 Bit mode

(3)WEP Key: Select a WEP Key (Key 1 to Key 4)

(4)WEP Mode: Mandatory for communicating with all stations having WEP enabled or Optional for WEP disabled

(5)Authentication Type: Open System or Shared Key (Select Shared Key for operation with an Access Point)

After all settings are complete, click Submit to save the settings.

Important: The WEP key must be exactly the same on all WEP enabled wireless devices that will communicate with each other.

InstantWave 11Mbps Wireless Networking Cards 29