Setting-Up Chapter 2
Operational Precautions
•Never try to modify the printer. Doing so creates the danger of fire or electrical shock.
•Never place any heavy objects on the power cord, pull on it or bend it. Doing so creates the danger of fire or electrical shock.
•Always make sure the printer is not placed on the electrical cord or the communications cables of any other electrical equipment. Also make sure that cords and cables do not get into the printer’s mecha- nism. Any of these conditions create the danger of malfunction and fire.
•Always take care so that paper clips, staples, or other small pieces of metal do not get into the printer through its vents or other open- ings. Such objects create the danger of fire or electrical shock.
•Do not allow water or other liquids to spill on or near the printer. Fire or electrical shock can occur should water or liquid come into contact with the printer.
•Should liquid or any piece of metal accidently get inside the printer, immediately turn it off, unplug the power cord, and contact your dealer. Failure to take this immediate action creates the danger of fire or electrical shock.
•Whenever the printer emits unusually high amounts of heat, smoke, an unusual odor, or noise, immediately turn it off, unplug it, and contact your dealer. Failure to take this immediate action creates the danger of fire or electrical shock.
Caution
◆Be sure to locate the printer in a
