6.Cut the strap or tape securing the corrugated cardboard end pieces protecting the corners of the server. Remove the four corner protectors and set them aside. Note the positions of the corner protectors that are marked FR (front right), FL (front left), RR (rear right) and RL (rear left). See Figure 4A.
7.Remove the corrugated cardboard protecting the top of the cabinet. See Figure 4B.
B
A
C
AStrap
BTop Corrugated Cardboard
CPlastic Stretch Film
Figure 4. Removing the Corner and Top Protectors
8.Cut and remove the plastic stretch film that is wrapped around the server. See Figure 4C.
9.Remove the unloading ramp and set it aside. See Figure 5A.
10.A metal ramp plate is attached to the unloading ramp. Release the Velcro strips and remove the ramp plate from the unloading ramp. See Figure 5B.
A
B 
AUnloading Ramp
BVelcro Strips and Ramp Plate
