11.Four Styrofoam stoppers prevent the server from moving during shipment. Wing nuts secure Styrofoam stoppers, located on both sides of the server as well as the front and rear of the server, to the shipping pallet. Remove the four wing nuts and remove the stoppers and set them aside. See Figure 6A.
12.A plastic sheathing, secured with tape, protects the bottom sides of the server. Remove the tape and then cut and remove the bottom sheathing. Be careful not to damage the upper vinyl shroud. Be sure the bottom sheathing is free and clear of the server wheels and levelers. See Figure 6B.
B
A
AStyrofoam Stoppers
BLower Plastic Sheathing
Figure 6. Removing the Cardboard Covers
13.Place the unloading ramp in front of the rear of the server and secure the ramp to the pallet using the ramp plate removed in Step 10. See Figure 7.
