NEC 60XC10, 50XC10, 42XC10 Control sequence, Operation commands, RS-232C - continued, English

3)Control sequence

1)The command from a computer to the Plasma monitor will take 400ms.

2)The Plasma monitor will send a return command 400ms* after it has received an encode. If the command is not received correctly,

the Plasma monitor will not send the return command.

3)The personal computer checks the command and confirms if the command which has been sent has been executed or not.

4)This Plasma monitor sends various codes other than the return code. When sending a control sequence via RS-232C, other codes from personal computers will be ignored.

*The sending time of the return command may be delayed depending on the monitor’s current activity (changing of the input signal, etc.).

[Example] Turn the power ON. (' ' is for ASCII code)

Sending commands	Status code from	Meaning
from the PC etc.	Plasma monitor
30 30 21 0D		Command for
'0' '0' '!' ' '		POWER ON
	30 30 21 0D	Command received
	'0' '0' '!' ' '	(Command echo back)

4) Operation commands

Operation commands execute the basic operation setting of this Plasma monitor. It may not operate when changing the signal:

Operation	ASCII		HEX
POWER ON	!		21h
POWER OFF	"		22h
INPUT VIDEO1	_v1	5Fh	76h	31h
INPUT S-VIDEO	_v3	5Fh	76h	33h
INPUT DVD/HD1	_v2	5Fh	76h	32h
INPUT DVD/HD2	_v5	5Fh	76h	35h
INPUT DVD/HD3	_h1	5Fh 68h 31h
INPUT SCART2	_v6	5Fh 76h 36h
INPUT VGA	_r2	5Fh	72h 32h
INPUT DVI	_r1	5Fh 72h 31h

•POWER OFF command should not be used less than 1 minute after the power is turned on.

•POWER ON command should not be used less than 1 minute after the power is turned off.

RS-232C- continued

English

English-25