Remote ControlqPOWER ON/STANDBY Switches the power on/standby.(This does not operate when the POWER/STANDBY indicator of the plasma is off.)wRGB/PC

Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT SELECT button on the monitor.

eDVD / HD

Press this button to select DVD/HD as the source. DVD/HD can also be selected using the INPUT SELECT button on the monitor.

rVIDEOPress this button to select VIDEO as the source.

VIDEO1 VIDEO2 VIDEO3

VIDEO can also be selected using the INPUT SELECT button on the monitor.tMENU/ENTERPress this button to access the OSM controls.Press this button during the display of the main menu to go to the sub menu.yCURSOR (/ /  / )

Use these buttons to select items or settings and to adjust settings or switch the display patterns.

uEXIT

Press this button to exit the OSM controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.

iPOINTERPress this button to display the pointer.oZOOM (+ /–)Enlarges or reduces the image.!0VOLUME (+ /–) Adjusts the audio volume.!1MUTE Mutes the audio.!2WIDE

Press this button to select and switch the screen sizes. WIDE button is not active for all signals.

!3DISPLAYDisplays the source settings on the screen.!4OFF TIMERActivates the off timer for the unit.!5SIDE BY SIDEPress this button to show a couple of pictures in the side-by-side mode.!6PICTURE IN PICTUREPress this button to show a couple of pictures in the picture-in-picture mode.!7SINGLECancels the split screen mode.!8SELECT/FREEZEPress this button to select the active picture in a split screen mode.

When the PIC FREEZE function is operating, this button can be used to display still images on the sub screen.

!9AUTO ADJUST

Press this button to adjust Fine Picture, Picture ADJ, Position, and Contrast automatically. Press this button in video mode and the Auto Adjust switches to ZOOM mode automatically when a letter box image is displayed.

@0ID SELECT

Set the ID number in the remote control. The remote control can then be used only for a display with the same ID number. When several displays are used together they can be controlled individually.

@1CLEAR/SEAMLESS SW

Clears the number set by the ID SELECT button. When the SEAMLESS SW function is operating, this button can be used to switch the input source quickly.

@2Remote control signal transmitter Transmits the remote control signals.@3Remote Jack

Insert the plug of the remote cable (The 1/8 Stereo Mini cable) here when using the supplied remote control in the wired condition.

En-9