Caution when placing the plasma monitor in portrait mode

 

 

Top side

 

 

 

 

 

 

 

 

 

 

•

Use the optional mount. Contact your store to purchase before installing.

 

 

 

 

 

 

OPTION1

 

 

 

 

OSM

 

 

 

•

Rotate 90° clockwise as seen from the front when installing.

 

 

 

 

 

 

RGB SELECT: RGB

 

 

 

 

 

 

 

 

 

 

 

 

BNC INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

:

RGB

 

 

 

 

 

 

90°

 

D- SUB INPUT

 

 

 

•

After installing, make sure the NEC logo is located at the

 

 

:

AUTO

 

 

 

 

 

 

 

 

 

 

ALL RESET:

OFF

 

 

 

 

 

 

 

 

 

 

 

 

HD SELECT

 

 

 

 

 

 

 

 

 

 

 

 

 

:

1080B

 

 

 

 

 

 

 

 

 

 

 

 

INPUT SKIP

 

 

 

 

 

left hand side of the screen when facing the plasma from

 

 

 

 

 

 

 

:

OFF

 

 

 

 

 

 

 

 

 

 

 

 

1024￿768

 

 

 

 

 

 

 

 

 

 

 

 

SEL. MENU/ENTER OK

 

 

 

 

 

 

 

 

 

 

 

 

 

EXIT RETURN

 

 

 

 

the front.

 

 

 

 

 

 

 

 

 

 

 

 

• Be sure to set “OSM ANGLE” to “V” when using.

 

 

 

 

 

 

 

 

 

 

 

 

* Failure to heed the above cautions may lead to malfunction.

 

 

 

 

 

 

 

 

 

 

 

 

Using the remote control

 

 

 

 

 

 

 

 

 

 

 

 

Battery Installation and Replacement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Designated batteries:

 

 

 

 

 

 

 

Bottom side

Please use size AAA (R03) or AAA (LR03).

Operating Range

 

 

 

 

 

 

Insert the 2 “AAA” batteries, making sure to set them in

 

 

 

 

 

 

with the proper polarity.

* Use the remote control within a distance of about 7 m/ 23

1.Press and open the cover.

 

ft. from the front of the monitor’s remote control sensor

 

 

 

and at horizontal and vertical angles of up to approximately

 

 

 

30°.

 

 

 

 

 

 

 

 

* The remote control operation may not function if the monitor’s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control.

2.Align the batteries according to the and indication inside the case.

Approx. 7 m/23 ft

3.Replace the cover.

Using the wired remote control mode

Connect the remote cable* to the remote control’s remote jack and the “REMOTE IN” terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be operated even if no batteries are loaded.

EXTERNAL CONTROL

REMOTE

IN OUT

Remote Control

Cable*

To Remote Jack

CAUTION

•Use only the specified batteries.•Make sure to insert the batteries correctly accordingto the indications of and .•Do not drop or mishandle the remote control.

•Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types together.

•Do not take apart the batteries, heat them, or throw them into a fire.

•When using the remote control in the wireless condition, be sure to unplug the remote cable from the REMOTE IN terminal on the monitor.

* The 1/8 Stereo Mini cable must be purchased separately. En-6