NEC 500, 900, 700 Quick Start, Connecting the Tilt/Swivel stand, Removing the Tilt/Swivel stand

Quick Start

Connecting the Tilt/Swivel stand

1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor down on a firm table

2.Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor.

3.Insert the hooks into slots.

4.Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.

NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor.

NOTE: To avoid self injury or damage to the monitor, attach and remove tilt/ swivel base with care.

CAUTION: Make certain that the tilt/swivel base is locked firmly into place before turning the monitor upright.

Slot

Hook

Firm Table

Latch

Hook

Removing the Tilt/Swivel stand

1. With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside down on a firm table.

2. Push down on the latch of the tilt/swivel base and slide the tilt/swivel base backward from the front of the monitor.

3. Pull out the tilt/swivel base from the slots on the bottom of the monitor.

3

AS500700700M900FINAL2.p65 3 10/24/03, 10:13 AM