Removing a Device from the VersaBay III
Use the following steps to remove a device from the VersaBay III.
1.Save your files.
2.Either shut down Windows and power off the NEC Versa, or use warm or hot swapping, which is available with the NEC VersaBay III Swapping Utility. The Swapping Utility is provided on the Application and Driver CD that ships with the system.
3.Close the LCD panel and locate the VersaBay III on the front of your system.
Locating the NEC VersaBay III
A - VersaBay III
4.Turn the NEC Versa upside down and locate the release lock. Slide the release lock to the unlocked position.
5.Locate the release latch. Slide the release latch to the unlocked position. (See the following figure.)
VersaBay III release lock and latch
A - Release Lock | B - Release Latch |
6.Remove the device from the VersaBay III.
2NEC Versa LXi VersaBay III
