Installing the NEC VersaBay III DVD-ROM Drive
Use the following steps to install the NEC VersaBay III
1.Save your files.
2.Shut down Windows and power off the NEC Versa.
3.Close the LCD panel and locate the VersaBay III on your system. For the location of the VersaBay III, see the previous section, “Removing a Device from the VersaBay III.”
4.If there is a VersaBay III device in the VersaBay III, refer to the instructions in the previous section to remove the device.
5.Turn the NEC Versa upside down and locate the release lock and the release latch (see the previous figure).
6.Slide the release lock to the unlocked position. Slide and hold the release latch in the unlocked position.
7.Align and install the device into the VersaBay III.
Installing the device into the VersaBay III
8.Slide the release lock to the locked position.
9.Turn the system over, open the LCD panel, and power on the system.
You are ready to install the NEC SoftDVD Player software. See the next section.
Installing the NEC SoftDVD Player
The NEC SoftDVD Player, which allows you to play DVD movies, is provided on the “NEC SoftDVD for NEC Versa LXi notebook computers” CD included with your
Once you have installed the VersaBay III
NEC Versa LXi VersaBay III
