Removing the LCD Module
To remove the LCD Module first remove the battery (see Removing the Battery) and remove the Keyboard (see Removing the Keyboard) then perform the following steps:
3. Remove the screws retaining the Heat Plate as shown in Fig. 12
M2.5 x 5 Silver
Fig. 12 Removing the screws retaining the Heat Plate
4. Flip over the base unit and release the screws retaining the LCD Module.
M2.5x9 Silver
Fig. 13 Removing the screws retaining the LCD Module
5. Release the screws on the system rear side as shown in Fig. 14
M2.5x9 Silver
Fig. 14 Removing the screws retaining the LCD Module
NEC Versa E6000/PB Easy Note G5 Disassembly Manual | Page 12 |