NEC E6000/PB Removing the LCD Panel

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see Removing the LCD Module), then perform the following steps:

1.Use a pin to remove the rubber cover on the LCD module as shown in Fig. 17

2.Remove all screws as shown in Fig. 17 and remove carefully the LCD cover.

M2.5x7 Silver

Fig. 17 Removing the rubber covers & screws on the LCD Module

3.Release the inverter board by remove the screw and disconnect all connectors as shown in Fig. 18

M2x4 Silver

Fig. 18 Removing the Inverter Board

NEC Versa E6000/PB Easy Note G5 Disassembly Manual Page 14