NEC E6000/PB Removing the WLAN Card Module

6. Open up the LCD lid, release the screws and the LCD cable connector.

M2x4 Silver

Fig. 15 Removing screws retaining LCD Cable Connector

7. Carefully lift up the LCD Module.

Removing the WLAN Card Module

To remove the WLAN Card Module first remove the battery (see Removing the Battery), remove the Keyboard (see Removing the Keyboard) and removing heat plate (see Removing the LCD Module) then perform the following steps:

1.Remove the wireless antenna connector and release the WLAN Card Module as shown in

Error! Reference source not found.

Fig. 16 Wireless Card Module

NEC Versa E6000/PB Easy Note G5 Disassembly Manual Page 13