Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE LCD COLOR MONITOR:

•DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel.

•Do not spill any liquids into the cabinet or use your monitor near water.

•Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fi re or equipment failure.

•Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fi re.

•Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

•The power supply cord you use must have been approved by and comply with the safety standards of your country. (Type H05VV-F 3G 1mm2 should be used in Europe).

•In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.

•Do not place any objects onto the monitor and do not use the monitor outdoors.

•Do not bend power cord.

•Do not use monitor in high temperatured, humid, dusty, or oily areas.

•Do not cover vent on monitor.

•Vibration can damage the backlight. Do not install where the monitor will be exposed to continual vibration.

•If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

•To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the monitor in a stable location and take measures to prevent falling.

Immediately turn off the power, unplug your monitor from the wall outlet and move to a safe location then refer servicing to qualifi ed service personnel under the following conditions. If the monitor is used in this condition, the monitor may cause fall, fi re and electric shock:

•If the monitor stand has been cracked or peeled.

•If the monitor has been wobbled.

•If the monitor has an unusual odor.

•When the power supply cord or plug is damaged.

•If liquid has been spilled, or objects have fallen into the monitor.

•If the monitor has been exposed to rain or water.

•If the monitor has been dropped or the cabinet damaged.

•If the monitor does not operate normally by following operating instructions.

•Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of detaching the system from the power supply.

CAUTION

The monitor should be installed close to a power outlet which is easily accessible.

•Handle with care when transporting. Save packaging for transporting.

•Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can cause serious damage.

Image Persistence: Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

English

English-3

Page 4 Page 6
Page 5
Image 5
NEC EA273WM, EA243WM user manual Recommended use, Safety Precautions and Maintenance, English-3
Page 4 Page 6

EA273WM, EA243WM specifications

The NEC EA243WM and EA273WM monitors are part of NEC's renowned MultiSync series, designed to deliver exceptional visual performance for professionals in various fields such as graphics design, photography, and data analysis. Each model comes with a range of advanced features and technologies that cater to the demanding needs of users who require precise color accuracy and extensive screen real estate.

The NEC EA243WM boasts a 24-inch screen size, providing a solid workspace while maintaining high definition clarity with a resolution of 1920 x 1200. This monitor is equipped with an IPS panel that delivers wide viewing angles of 178 degrees both horizontally and vertically, ensuring consistent color representation without distortion regardless of the viewing position. One of the standout features of the EA243WM is its extensive color support, covering 99% of the sRGB color space, making it ideal for color-critical applications.

In terms of connectivity, the EA243WM comes with a variety of input options including DisplayPort, DVI, and VGA, allowing for flexible integration with a range of devices. It also features USB hub ports that enable easy access to peripheral devices, enhancing productivity in multi-tasking scenarios. The ergonomic design of the EA243WM, which includes height, tilt, swivel, and pivot adjustments, ensures that users can customize their viewing experience for maximum comfort and efficiency.

Meanwhile, the NEC EA273WM offers a larger 27-inch screen, increasing the display area for multitasking and complex workflows. With a resolution of 2560 x 1440, the EA273WM provides sharper images and more detailed visuals compared to its 24-inch counterpart. Like the EA243WM, it employs IPS technology for wide viewing angles and vibrant color reproduction. The EA273WM also supports 98% of the sRGB color gamut, ensuring professional-level color fidelity.

Both monitors leverage NEC’s advanced calibration technologies, including the MultiProfiler software that enables users to create custom calibration profiles suited to their specific work environments. Additionally, the EcoMode feature within NEC monitors allows users to adjust brightness levels to save energy without sacrificing image quality, making these models an environmentally friendly option.

In conclusion, the NEC EA243WM and EA273WM monitors are crafted to meet the high standards of professionals seeking reliable and high-quality displays. With their impressive specifications, connectivity options, and ergonomic designs, these monitors stand out as excellent choices for users who value performance and comfort in their workspace.
Top Page Image Contents