Troubleshooting

No picture

Display card should be completely seated in its slot.

Power Button and computer power switch should be in the ON position.

Signal cable should be completely connected to display card/computer.

Check connector for bent or pushed-in pins.

Image is scrolling or unstable

Signal cable should be completely attached to the computer.

Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments.

If the Macintosh cable adapter is used, check for proper connection or make sure the display card is Macintosh compatible and that the card is properly seated in the computer.

LED on monitor is not lit (no green, orange, yellow color can be seen)

Power Switch should be in the ON position and power cord should be connected.

Picture is fuzzy or color looks blotchy

If the picture is fuzzy, adjust the Moiré Canceler control. If the color looks blotchy, adjust the Brightness, Contrast or GlobalSync® controls, or use the EdgeLockcontrol to change modes.

Access the Degauss Control through OSM™ controls. Activate the Degauss Control.

CAUTION: A minimum interval of 20 minutes should elapse before the Deguass Control is used a second time when not switching between modes.

Picture bounces or a wavy pattern is present in the picture

Move electrical devices that may be causing electrical interference away from the monitor.

See inside cover of User’s Manual for FCC information.

Edges of the display image are not square

Use the OSM Geometry and Corner Correction Controls to straighten the edges.

If possible, position the front of the monitor facing east.

Display image is not centered, too small, or too large

Use the OSM Size and Position Controls to adjust the image.

Thin lines appear on your screen

Thin lines are normal for an aperture grille CRT and are not a malfunction. These are shadows from the damper wires used to stabilize the aperture grille and are most noticeable when the screen’s background is light (usually white).

13

FP1355.wpc

15

1/19/01, 1:20 PM

Page 15
Image 15
NEC FP1355 user manual Troubleshooting

FP1355 specifications

The NEC FP1355 is a notable addition to the world of display technology, often recognized for its impressive features and robust performance. As a flat-panel monitor, it is designed to serve both commercial and industrial applications, where image clarity and reliability are paramount.

One of the primary features of the NEC FP1355 is its size and resolution. With a 13.5-inch display, it strikes a balance between compact form factor and ample screen space, making it ideal for environments where desk space is limited. The monitor typically supports a resolution of 1280 x 1024 pixels, ensuring sharp images and clear text, which is essential for detailed work like data analysis or graphic design.

The FP1355 incorporates advanced LCD technology, which not only enhances the brightness and color reproduction but also ensures more consistent performance over time. This monitor is known for its wide viewing angles, making it easier for multiple users to view the screen without significant color distortion or glare, a key factor in collaborative environments.

Another characteristic that sets the NEC FP1355 apart is its versatility in connectivity options. This monitor often comes equipped with multiple input interfaces, including VGA and DVI-D, allowing users to connect to various devices seamlessly. This feature is particularly beneficial in a rapidly evolving technological landscape where compatibility with different devices is crucial.

Additionally, the NEC FP1355 is designed with user ergonomics in mind. It often includes features such as height adjustment, tilt, and swivel capabilities, allowing for a more personalized viewing experience. This is especially important in settings where the monitor is used over extended periods, reducing the risk of strain or discomfort.

In terms of environmental considerations, the NEC FP1355 is designed with energy efficiency in mind. It typically meets various environmental standards, helping to minimize the carbon footprint, a factor that is increasingly important in today's eco-conscious society.

Overall, the NEC FP1355 stands out due to its blend of performance, versatility, and user-friendly features. Whether for professional or industrial use, it meets the demands of users who require a reliable display solution that delivers quality visuals while being considerate of ergonomics and environmental impact. With its solid construction and effective technology, it remains a preferred choice for those seeking a dependable flat-panel monitor.