NEC LCD1700NX manual Installation, Steps

MultiSync LCD1700NX 9

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.Open the connector cover first.

2.And then open the cable cover.

3.Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Digital: Connect the DVI signal cable to the connector of the computer first, then to the monitor.

Analog: Connect the 15-pin mini D-SUB signal cable to the connector of the computer first, then to the monitor.

4.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

5.Assemble the cable cover.

6.Cover the connector cover.

7.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

8.If the monitor still does not function properly, please refer to the trobleshooting section to diagnose the problem.

D-SUB Cable

DVI-D Cable(not included)

PULL

Cable Cover

(This semi-circle opening is the Cables outlet)

Connector Cover

LCD1700NX(English).PM6 11 02.2.12, 3:50 PM