Quick Start

To attach the MultiSync® LCD1810monitor to your system, follow these instructions:

1.Turn off the power to your computer.

If you are using the supplied video signal cable, continue to step 2. If you are using a BNC cable (not included), please skip to Step 3.

NOTE: BNC cables may be purchased at your local electronics store.

2.For the PC: Connect one end of the video signal cable to the back of the monitor (Figure A.1) and the other end to the connector of the display card in your system

(Figure A.2). Tighten all screws. Proceed to Step 4.

Connector

Cover

Figure A.1

Figure A.2

3

78133813.wpc

5

10/28/99, 3:21 PM

Page 5
Image 5
NEC LCD1810 user manual Quick Start, Turn off the power to your computer