NEC LCD1810 user manual Brightness/Contrast Controls

Controls

BNC/D-SUB (MultiSync® LCD1810™ only): Allows you to change between the BNC and D-SUB signal inputs.

OSM™ (On-Screen Manager) control buttons on the front of the monitor function as follows:

To access OSM menu, press any of the control buttons ( ,, , ) or the PROCEED or EXIT button.

To rotate OSM between Landscape and Portrait modes, press the RESET button. NOTE: OSM menu must be closed in order to rotate.

		Main Menu	Sub-Menu
EXIT		Exits the OSM controls.	Exits to the OSM main
			menu.
CONTROL	/	Moves the highlighted	Moves the highlighted
		area up/down to select	area up/down to select
		one of the controls.	one of the controls.
CONTROL	/	Moves the highlighted area	Moves the bar left/
		left/right to select control	right to increase or
		menus.	decrease the
			adjustment.
PROCEED		Has no function	Activates Auto Adjust
			and ALL RESET functions.
RESET		Resets the highlighted	Resets the highlighted
		control menu to the factory	control to the factory
		setting.	setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the RESET function by pressing the EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO AUTO ADJUST CONTRAST

Adjusts the image displayed for non-standard video inputs.

OSM LOCK OUT

The OSM LOCK OUT control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the LOCK OUT mode, a screen will appear indicating that OSM controls are locked out.

•To enter the LOCK OUT mode, simultaneously press the PROCEED and

button. The LOCK OUT window will appear.

•To activate the LOCK OUT function, simultaneously press and hold down the PROCEED and button. The OSM window will disappear within seconds and the LOCK OUT function will be activated.

10

78133813.wpc 12 10/28/99, 3:22 PM