NEC LCD1810 user manual Figure G.1

Quick Start cont.

To attach your MultiSync® LCD2010™ monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable

to the connector of the display card in your system (Figure G.1). Tighten all screws. For the Mac: Connect the MultiSync Macintosh cable adapter to the computer (Figure H.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the

MultiSync Macintosh cable adapter (Figure H.1). Tighten all screws.

NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC Technologies at (800) 820-1230.

Figure G.1

Figure H.1

6

78133813.wpc 8 10/28/99, 3:21 PM