Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).
To prepare the monitor for alternate mounting purposes:
1.Disconnect all cables.
2.Place monitor face down on a
3.Press the ÒÓ portion with your index finger and at the same time slide the lower stand cover. (Figure S.2)
Next, lift up the stand, remove the lower stand cover, then go on to remove the upper stand cover. (Figure S.3)
Return the stand to its original position, remove the 4 screws that connect the monitor to the stand, and lift off the stand assembly. (Figure S.4)
4.Reverse this process to reattach stand.
NOTE: Use only
Figure TS.1
English |