CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN

REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE

FOLLOWING WHEN YOU POSITION THE MONITOR:

¥For optimum performance, allow 20 minutes for warm-up.

¥Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.

¥ Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm.

¥ Rest your eyes periodically by focusing on an object at least 6 m away. Blink often.

¥Position the monitor at a 90¡ angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.

¥If reflected light makes it hard for you to see your screen, use an antiglare filter.

¥ Adjust the monitorÕs brightness and contrast controls to enhance readability.

¥Use a document holder placed close to the screen.

¥Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.

¥Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).

¥Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

¥Use the preset Size and Position controls with standard signals.

¥Use the preset Colour Setting.

¥Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.

¥Do not use primary colour blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient contrast.

Cleaning the LCD Panel

¥When the liquid crystal panel is stained with dust or dirt, please wipe with soft cloth gently.

¥Please do not rub the LCD panel with hard material.

¥Please do not apply pressure to the LCD surface.

¥Please do not use OA cleaner it will cause deterioration or discolor on the LCD surface.

Cleaning the Cabinet

¥Unplug the power supply

¥Gently wipe the cabinet with a soft cloth

¥To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.

NOTE: Many plastics are used on the surface of the cabinet. DO NOT clean with benzene, thinner, alkaline detergent, alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Do not touch rubber or vinyl to the cabinet for a long time. These types of fluids and fabrics can cause the paint to deteriorate, crack or peel.

English-10

Page 11
Image 11
NEC LCD1970NX user manual Ergonomics, Cleaning the LCD Panel, Cleaning the Cabinet, English-10