NEC LCD1980SX Appendix, How to use the advanced menu, How to exit the advanced menu, English-15

Appendix

If you need detailed information about the controls, please use the advanced menu.

<How to use the advanced menu>

•Turn off your monitor.

•Turn on your monitor by pushing the “POWER” and “SELECT” button at the same time for at least one second simultaneously.

•You will see the Advanced menu.

This menu is larger than the normal OSM.

<How to exit the advanced menu>

•Turn off and restart your monitor in the normal way.

To make an adjustment, ensure that the tag is highlighted, then press “SELECT”.

To move to another tag, press “EXIT”, then press “ ” or “ ” to highlight another tag.

Tag1	Brightness				Adjusts the overall image and screen background brightness. Press “+” or “-” to adjust.
	Contrast				Adjusts the image brightness and contrast in relation to the background. Press “+” or “-” to
					adjust.
	Auto Black Level				Automatically adjusts the black level. Any adjustment requires the image to have black
	(Analog input only)				portions. Press “SELECT” to activate Auto Adjust.
	Auto Contrast				Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.
	(Analog input only)				Any adjustment requires the image to have white portions.
	Black Level				Allows you to manually adjust the black level. Press “+” or “-” to adjust.
	(Analog input only)
	Auto Brightness				This function adjusts the brightness automaticaly for the best CONTRAST and
					BRIGHTNESS setting based on the white display area.
Tag2	R-H.position				Adjusts the position of the red component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	G-H.position				Adjusts the position of the green component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	B-H.position				Adjusts the position of the blue component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	R-SHARPNESS				Adjusts the sharpness of the red component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	G-SHARPNESS				Adjusts the sharpness of the green component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	B-SHARPNESS				Adjusts the sharpness of the blue component of the image. Press “+” or “-” to adjust.
	(Analog input only)
Tag3	Signal				Determines when the auto adjustment is activated automatically.
	(Analog input only)				The choices are “OFF”, “SIMPLE” and “FULL”. Press “+” or “-” to select.
		SIGNAL			Input Signal			Adjustment Items
		setting		New		Re-input		H-size, Fine, H/V-Position		Contrast
		OFF		O		X		*		-
		SIMPLE		O		O		*		-
		FULL		O		O		*		*
		O: automatical adjustment is performed about the items filled *.
		X: automatical adjustment is not performed.
		Notice: Automatical adjustment dose not work at less than 800x600 resolution.
	Auto SW				Determines the automatic adjustment level for Auto Adjust. The choices are “SIMPLE”,
	(Analog input only)				“FULL” and “DETAIL”. Press “+” or “-” to select. Refer to the below table.
	Determines the automatic adjustment level as shown in the below table.
			Size, Fine, Position			Contrast	Black Level, Long cable capability*1			Time
		SIMPLE		O		X		X		1.5 seconds
		FULL		O		O		X		2 seconds
		DETAIL		O		O		O	10 to 20 seconds
		*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using “Long cable software” which is included in the attached CD-ROM.

English

English-15