Quick Start –continued
Removing the Base
Note: Always remove the Base when shipping the LCD.
1. | Place monitor face down on a |
|
| face. |
|
2. | Using your thumbs, press the quick release button |
|
| to unlock the stand. | Quick release button |
3. | Pull the unlocked base off the stand. |
|
Connecting a Flexible Arm
This LCD monitor is designed for use with a fl exible arm. Please use the attached screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark).
12mm 
M4
4 x 12mm with lock
washer and flat washer
100 mm 
100 mm
Specifications
4-SCREWS (M4)
(MAX depth: 8.5 mm)
If using other screws, check depth of holes.
Thickness of Bracket (Arm) 2.0~3.2 mm
Tighten all
screws.
Weight of LCD assembly: 4.2 kg (MAX)
6
