NEC LCD2080UX+ user manual Auto, English-18

	OSM Rotation	To switch OSM between Landscape and Portrait modes. Press “+” or “-” to select.
	Resolution Notifier	The optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the
		screen after 30 seconds, notifying you that the resolution is not set to 1600 x 1200.
		Press “+” or “-” to select.
	Factory Preset	Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,
		CONTRAST, IMAGE CONTROLS, COLOR CONTROL SYSTEM, SHARPNESS,
		EXPANSION MODE, OFF TIMER, OSM POSITION, OSM TURN OFF, DISPLAY
		MODE)back to the factory settings. Highlighting the control to be reset and pressing the
		RESET button can reset individual settings.
		Press “SELECT” to reset.
Tag8	Video Band Width	It is used when the unnecessary noise from computer appears on a screen. It is strong
	(Analog input only)	ineffective, so that a number becomes small. Press “+” or “-” to select.
	Sync Threshold	Adjusts the slice level of a synchronization signal. Press “SELECT” to move the
	(Analog input only)	adjustment menu.
		SEP./COMP.: Adjusts the sensitivity of the separate or composite input signals.
		Try this option if the FINE adjustment does not successfully eliminate the noise.
		Sync On Green: Adjusts the sensitivity of the Sync On Green input signals.
		Adjusts the slice level when separating a synchronization from sync On Green signal input.
		Press “+” or “-” to select.
	SOG Correction	Shapes the waveform of the Sync On Green signals. Try this option if the FINE
	(Analog input only)	adjustment does not eliminate the noise produced after the signal cable has been
		extended. Press “SELECT” to move adjustment menu.
		OFF
		The inputted synchronization signal is used as it is.
		AUTO
		Shapes the waveform according to the input waveform automatically. The signal which
		has not deteriorated is used as it is.
		ON
		Corrects the waveform irrespective of the input waveform.
Tag9	Display Mode	Provides information about the current display resolution and technical data, including the
		preset timing currently being used and the horizontal and vertical frequencies. Increases
		or decreases the current resolution. Press “SELECT” to move the adjustment mode, and
		press “+” or “-” to adjust.
	Monitor Info.	Indicates the model and serial numbers of your monitor.

English-18