NEC LCD2080UXI manual Appendix

Appendix –continued

Tag4	Auto	Automatically adjusts the Image Position and H. Size settings and Fine
	(Analog input only)	settings. Press "SELECT" to activate Auto Adjustment.
	H. Position	Controls Horizontal Image Position within the display area of the LCD. Press
		"+" or "-" to adjust.
	V. Position	Controls Vertical Image Position within the display area of the LCD. Press "+"
		or "-" to adjust.
	H. Size	Adjusts the horizontal size of the screen.
	(Analog input only)	If the “AUTO Adjust function” does not give you a satisfactory picture
		setting, a further tuning can be performed using the “H.Size” function (dot
		clock). For this a Moiré test pattern could be used. This function may alter the
		width of the picture. Use left/Right Menu to center the image on the screen. If
		the H.Size is wrongly calibrated, the result would look like on the left drawing.
		The image should be homogeneous.
		When H.SIZE value is wrong. When H.SIZE value is improved. When H.SIZE value is correct.
	Fine	Improve focus, clarity and image stability by increasing or decreasing this
	(Analog input only)	setting.
		If the “Auto Adjust function” and the “H.Size” function do not give you a
		satisfactory picture setting, a fine tuning can be performed using the “Fine”
		function. It improves focus, clearity and image stability by increasing or
		decreasing this setting. For this a Moiré test pattern could be used. If the Fine
		value is wrongly calibrated, the result would look like on the left drawing. The
		image should be homogeneous.
		When FINE value is wrong. When FINE value is correct.
Tag5	Black Level	Adjusts the black level. Press "+" or "-" to select.
	(Analog input only)	MANUAL allows you to manually adjust the black level. Press "+" or "-" to
		adjust.
		AUTO automatically adjusts the black level. Ensure that the image has 64 or
		more adjacent black dots before making an adjustment. Press "SELECT" to
		activate Auto Adjust.
Tag6	Color Control	Six colors for the desired color setting (sRGB and NATIVE color presets
		cannot be changed).
		Color temperature increases or decreases in each preset. Press " " or " "
		to select color. Press "+" or "-" to adjust. Press "SELECT" to customize.
		R,Y,G,C,B,M,S
		Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and
		Saturation depending upon which is selected. The change in color will appear
		on screen and the direction (increase or decrease) will be shown by the color
		bars. Press "+" or "-" to adjust.
		NATIVE
		Original color presented by the LCD panel that is not adjustable.
		50

LCD2080UXimanual_053105.pmd 50 6/2/05, 2:51 PM