NEC LCD2080UXI manual Appendix

Appendix –continued

Tag7

Sharpness	This is a digital capability for keeping a crisp image at all signal timings. It
	continuously adjusts to maintain a distinct or soft image as you prefer, and is
	set independently according to different timings.
	The number of adjustment steps is different depending on whether the mode is
	OFF, FULL or ASPECT (1600 x 1200 is OFF Mode). Press "+" or "-" to adjust.
Expansion Mode	Sets the zoom method.
	FULL: The image is expanded to 1600 x 1200, regardless of the resolution.
	ASPECT: The image is expanded without changing the aspect ratio.
	OFF: The image is not expanded.
	CUSTOM (Digital input and Resolution of 1600 x 1200 only):
	Select one of nine expansion rates. In this mode, the resolution may be low
	and there may be blank areas. This mode is for use with special video cards.
	Press "SELECT" to move the select menu, and press "+" or "-" to select.
Video Detect	Selects the method of video detection when more than one computer is
	connected. Press "+" or "-" to select.
	FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode.
	When current video input signal is not present, then the monitor searches for
	a video signal from the other video input port. If the video signal is present in
	the other port, then the monitor switches the video source input port to the
	new found video source automatically. The monitor will not look for other
	video signals while the current video source is present.
	LAST DETECT: The video input has to be switched to the “LAST DETECT”
	mode. When the monitor is displaying a signal from the current source and a
	new secondary source is supplied to the monitor, then the monitor will
	automatically switch to the new video source. When current video input signal
	is not present, then the monitor searches for a video signal from the other
	video input port. If the video signal is present in the other port, then the
	monitor switches the video source input port to the new found video source
	automatically.
	NONE: The Monitor will not search the other video input port unless the
	monitor is turned on.
DVI Selection	This function selects the DVI input mode (Input 1). When the DVI selection has
	been changed, you must restart your computer. Press "+" or "-" to select.
	AUTO: By using the DVI-D to DVI-D cable, the DVI SELECTION is DIGITAL.
	By using the D-SUB to DVI-A cable, the DVI SELECTION is ANALOG.
	DIGITAL: DVI digital input is available.
	ANALOG: DVI analog input is available.
Off Timer	Monitor will automatically turn off after the preset time period from power on
	with the ON/OFF function. When you select "ON," press "SELECT" and "+"
	or "-" to adjust.
Language	OSM control menus are available in seven languages. Press "+" or "-" to
	select.
OSM Position	You can choose where you would like the OSM control image to appear on
	your screen. Selecting OSM Location allows you to manually adjust the
	position of the OSM control menu left, right, down or up. Press "SELECT" to
	move the adjustment menu, and press "+" or "-" to adjust.
OSM Turn off	The OSM control menu will stay on as long as it is in use. In the OSM Turn
	Off submenu, you can select how long the monitor waits after the last touch of
	a button to close the OSM control menu. The preset choices are 10, 20, 30,
	45, 60 and 120 seconds. Press "+" or "-" to select.

51

LCD2080UXimanual_053105.pmd 51 6/2/05, 2:51 PM