Specifications - LCD225WNXM

Monitor Specifications

 

MultiSync LCD225WNXM Monitor

Notes

LCD Module

 

Diagonal:

55.9 cm/22.0 inches

Active matrix; thin film transistor (TFT)

Native Resolution (Pixel Count):

1680 x 1050

liquid crystal display (LCD); 0.282 mm dot

 

 

 

 

pitch; 300 cd/m2 (Typ) white luminance,

 

 

 

 

1000:1 (Typ) contrast ratio, typical;

 

 

 

 

response time: 5 ms (Typ).

 

 

 

 

Input Signal

PC INPUT: Video:

ANALOG 0.7 Vp-p/75 Ohms

Digital Input: DVI-D

 

 

Sync:

Separate sync.TTL Level (Positive/Negative)

 

 

 

Horizontal sync. Positive/Negative

 

 

 

 

Vertical sync. Positive/Negative

 

 

AUDIO INPUT:

STEREO Mini Jack

 

 

 

 

500mV rms Input Impedance 20 Kohm

 

 

 

 

 

Head Phone Output

 

STEREO Mini Jack

 

 

 

 

Headphone Impedance 32 Ohm

 

 

 

 

 

 

Display Colors

 

Analog input:

16,777,216

Depends on display card used.

 

 

 

 

Synchronization Range

Horizontal:

31.5 kHz to 81.1 kHz

Automatically

 

 

Vertical:

56 Hz to 75 Hz

Automatically

 

 

 

 

 

Viewing Angle

 

Left/Right:

-80¡/+80¡ (CR>10), -88¡/+88¡ (CR>5)

 

 

 

Up/Down:

-80¡/+80¡ (CR>10), -88¡/+88¡ (CR>5)

 

 

 

 

 

Resolutions Supported

 

720 x 400*1 @ 70 Hz

Some systems may not

 

 

 

640 x 480*1 @ 60 Hz to 75

support all modes listed.

 

 

 

800 x 600*1 @ 56 Hz to 75 Hz

 

 

 

 

832 x 624*1 @ 75 Hz

 

 

 

 

1024 x 768*1 @ 60 Hz to 75Hz

 

 

 

 

1280 x 768*1 @ 60 Hz

 

 

 

 

1152 x 864*1 @ 75 Hz

 

 

 

 

1152 x 870*1 @ 75 Hz

 

 

 

 

1280 x 960*1 @ 60 Hz to 75Hz

 

 

 

 

1280 x 1024*1 @ 60 Hz to 75Hz

 

 

 

 

1360 x 768*1 @ 60 Hz

 

 

 

 

1400 x 1050*1 @ 60 Hz to 75Hz

 

 

 

 

1440 x 900*1 @ 60 Hz to 75 Hz

Recommended resolution is 60 Hz for

 

 

 

1680 x 1050 @ 60 Hz................................. optimal display performance.

 

 

 

 

Active Display Area

Horizontal:

473.8 mm/18.7 inches

 

 

 

Vertical:

296.1 mm/11.7 inches

 

 

 

 

 

Speakers

Practical Audio Output:

1.0 W + 1.0 W

 

 

 

 

 

 

USB Hub

 

I/P:

USB Specification Revision 2.0

 

 

 

Port:

Upstream 1

 

 

 

 

Downstream 4

 

 

 

Load Current:

Maximum 0.5 A per port

 

 

 

 

 

 

Power Supply

 

 

100 - 240 V ~ 50/60 Hz

 

 

 

 

 

Power Consumption

 

60 W

 

 

 

 

 

Dimensions

 

 

505.7 mm (W) x 391.3 - 501.3 mm (H) x 245.0 mm (D) (with stand)

 

 

 

19.9 inches (W) x 15.4 - 19.7 inches (H) x 9.6 inches (D)

 

 

 

505.7 mm (W) x 344.1 mm (H) x 76.7 mm (D) (without stand)

 

 

 

19.9 inches (W) x 13.5 inches (H) x 3.0 inches (D)

 

 

 

 

 

Weight

 

with stand:

9.3 kg/20.5 lbs.

 

 

 

without stand:

6.3 kg/13.9 lbs.

 

 

 

 

Environmental Considerations

 

 

Operating Temperature:

5¡C to 35¡C/41¡F to 95¡F

 

 

 

Humidity:

30% to 80%

 

 

 

Altitude:

0 to 3,048 m/0 to 10,000 Feet

 

 

Storage Temperature:

-10¡C to +60¡C/14¡F to 140¡F

 

 

 

Humidity:

10% to 85%

 

 

 

Altitude:

0 to 12,192 m/0 to 40,000 Feet

 

 

 

 

 

 

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

English-13

English

Page 14
Image 14
NEC LCD205WNXM user manual Specifications LCD225WNXM, Monitor Specifications MultiSync LCD225WNXM Monitor, English-13