Setup Procedure -continued
10. Recommended Adjustments
To reduce the risk of the “image persistence”, please adjust the fol- lowing items based on the application being used.
“SCREEN SAVER” (See page 24), see page ”SIDE BORDER COLOR” (See page 24), “DATE & TIME” (See page 27), “SCHEDULE” (See page 27)
11. When the monitor is installed in the portrait position
•Remove the stands (feet).
•Left edge should be the upper edge from front view.
12. Installing and removing stand
How to install stand
1. | Please turn monitor off. |
2. | Place stand onto monitor with the long ends of the feet in front |
| of the monitor. |
Speaker terminal
•How to use the attached speaker plug AV
English
3. After inserting stand in guide block, fasten thumbscrews on both |
sides of the monitor. |
How to remove the stand
1.Spread the protective sheet on a flat surface, such as a desk.
2.Place monitor on the protective sheet.
3.Remove thumbscrews with a screwdriver or with your fingers and place them in a safe place for reuse.
Standard cable
Speaker plug
Thumbscrews
Stand
NOTE: Place stand onto monitor so that the long end of the feet are in the front
CAUTION: Handle with care when mounting LCD monitor stand and avoid pinching your fingers.
13. When using external speakers AV
Insert the negative
Fixed cable and speaker plug.
We recommend using the optional speakers designed for the MultiSync LCD3210.
The external speaker terminals of the MultiSync LCD3210 may be connected with the speaker plug of a mainframe sound speaker.
It this case, please exchange the lead connector of a mainframe sound speaker for an attached speaker plug.
AV | Denotes an AV unit function. | Insert the fixed cable and speaker plug to the speaker terminal. |
| All AV functions are enabled when the AV unit is installed. | |
|
|