Parts Name and Functions
Control Panel
English
ON 
OFF
1POWER button (
)
Switches the power on/off. See also page 21.
2EXIT button
Activates the OSD menu when the OSD menu is
3PLUS (+) button
Acts as (+) button to increase the adjustment with OSD menu. Increases the audio output level when the OSD menu is turned off.
4MINUS
Acts as
5UP (
) button
Activates the OSD menu when the OSD menu is 
button to move the highlighted area up to select the adjustment with OSD menu.
6DOWN (
) button
Activates the OSD menu when the OSD menu is 
button to move the highlighted area down to select the adjustment with OSD menu.
7INPUT button
Acts as SET button within OSD menu. (Toggle switches between [DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD], [VIDEO],
8Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the wireless remote control). See also page 8.
Glows green when the LCD monitor is in active*. Glows red when the LCD is in POWER OFF (ECO standby) mode. Glows Amber when the LCD is in POWER OFF (standby). Amber blinks when the monitor is in Power Save Mode. Green and Amber blink alternately while in Power Standby with the ÒSCHEDULE SETTINGSÓ function enabled. When a component failure is detected within the monitor, the indicator will blink red.
*If ÒOFFÓ is selected in ÒPOWER INDICATORÓ (see page 27), LED will not light when the LCD monitor is in active mode.
9Main Power Switch
On/off Switch to turn main power on/off.
Control Key Lock Mode
This control completely locks out access to all Control Key functions. To activate the control key lock function, press both of 
and 
and hold down simultaneously for more than
3 seconds. To resume back to user mode, press both of 
and 
and hold simultaneously for more than 3 seconds.
