NEC LCD4010, LCD4610 Image Flip, Scan Mode, Scan Conversion, Film Mode, Monitor ID, IR Control

	ADVANCED OPTION	IMAGE FLIP							Selects the image flipping or rotation.
	S-VIDEO MODE		H MIRROR						NORMAL: Normal display.
	BLACK LEVEL EXPANSION
			NORMAL
IMAGE FLIP	GAMMA SELECTION		V MIRROR						H MIRROR: Mirror image for horizontal direction.
	IMAGE FLIP
			ROTATE
	SCAN MODE
	SCAN CONVERSION								V MIRROR: Mirror image for vertical direction.
	FILM MODE
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU			:SEL		EXIT :RETURN MENU :EXIT MENU			ROTATE: Rotate the image 180 degrees.
	ADVANCED OPTION								Changes the display area of the image.
	S-VIDEO MODE	SCAN MODE
	BLACK LEVEL EXPANSION
SCAN MODE	GAMMA SELECTION								OVERSCAN: Set to display area about 95%
	IMAGE FLIP			OVERSCAN		/	UNDERSCAN
	SCAN MODE
	SCAN CONVERSION		+ -: SEL			EXIT :RETURN MENU :EXIT MENU			UNDERSCAN: Set to display area about 100%
*:INPUT DVD/HD, VIDEO only	FILM MODE
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									Selects IP (Interlace to Progressive) converter function.
	ADVANCED OPTION								PROGRESSIVE: Enable the IP function, to convert
	S-VIDEO MODE	SCAN CONVERSION
	BLACK LEVEL EXPANSION								interlace signal to progressive. Normally use this setting.
SCAN CONVERSION	GAMMA SELECTION
	IMAGE FLIP	PROGRESSIVE				/	INTERLACE
	SCAN MODE								INTERLACE: Disable the IP function.
	FILM MODE
	SCAN CONVERSION
			+ -: SEL			EXIT :RETURN MENU :EXIT MENU			NOTE: This mode is better suited for motional pictures,
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									but it is in danger of image retention.
									Selects Film mode function.
	ADVANCED OPTION								AUTO: Enable the Film mode function. This mode is
	S-VIDEO MODE	FILM MODE							better suited for movies, which is converted 24 Frames/
	BLACK LEVEL EXPANSION
FILM MODE	GAMMA SELECTION
	IMAGE FLIP				AUTO	/	OFF		sec source to DVD Video. We recommend to select
	SCAN MODE
	SCAN CONVERSION								“PROGRESSIVE” in “SCAN CONVERSION”.
	FILM MODE
			+ -: SEL			EXIT :RETURN MENU :EXIT MENU
*:INPUT DVD/HD, VIDEO only	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU								OFF: Disable the Film mode function. This mode is
									better suited for Broadcasting or VCR source.
	ADVANCED OPTION								Set the Monitor ID number to control the daisy chained
									multiple MultiSync LCD4010s / MultiSync LCD4610s
	MONITOR ID	MONITOR ID
MONITOR ID	IR CONTROL			ID No.			1		with RS-232C.
	HEAT STATUS
	TILE MATRIX
	POWER ON DELAY
	DATE & TIME
	SCHEDULE
	ADVANCED OPTION RESET		+ -: SEL			EXIT :RETURN MENU :EXIT MENU			The Monitor ID number is selectable between 1 and 26.
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
									Selects the infrared wireless remote controller mode
									with using the RS-232C daisy chain.
									The item in this menu will become effective by pressing
									“SET” button on the selected item.
									NORMAL: The monitor will be controlled normally by
	ADVANCED OPTION	IR CONTROL							wireless remote controller.
	MONITOR ID		NORMAL						PRIMARY: Set “PRIMARY” at the head of the daisy
			SECONDARY
	TILE MATRIX
IR CONTROL	IR CONTROL		PRIMARY
	POWER ON DELAY		LOCK
	HEAT STATUS								chained monitors by RS-232C.
	DATE & TIME
	SCHEDULE								SECONDARY: Set “SECONDARY” after 2nd daisy
	ADVANCED OPTION RESET
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU	:SEL SET :SET				EXIT :RETURN MENU :EXIT MENU
									chained monitor.
									LOCK: Disable the monitor control by infrared wireless
									remote controller.
									Keep pressing “DISPLAY” button during 5 sec or more,
									this setting will return to “NORMAL”.
									Tile Matrix demonstrates multiple screens. This feature
									provides a single large screen using up to 25 monitors.
									It will be able to divide up to 5 each H and V.
									This requires you to feed the PC output into each of the
									monitors through a distributor.
									Do not use LCD4010 and LCD4610 together for
	ADVANCED OPTION	TILE MATRIX							TILE MATRIX.
	MONITOR ID		H MONITORS				1		H MONITORS: Select number of horizontal divide.
TILE MATRIX	IR CONTROL		V MONITORS				1
	TILE MATRIX		POSITION				1		V MONITORS: Select number of vertical divide.
	POWER ON DELAY
	HEAT STATUS		TILE COMP				YES /	NO
	DATE & TIME		ENABLE				YES /	NO
	SCHEDULE								POSITION: Select a position to expand the screen.
	ADVANCED OPTION RESET			:SEL			EXIT :RETURN
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU		+ -: ADJ				MENU :EXIT MENU		TILE COMP: Works in tandem with Tile Matrix to
									compensate for the width of the tile bezels in order to
									accurately display the image.
									ENABLE: Select “YES”, the monitor will expand the
									selected position.
									PIP, POP, SIDE by SIDE and STILL and “DYNAMIC”
									ZOOM mode will be disabled when “TILE MATRIX” is
									activated.

English

English-27