NEC LCD93V, LCD73V Contents, Quick Start, Figure S.1, Figure A.1, Figure A.2, English-3

Contents

Your new NEC LCD monitor box* should contain the following:

¥LCD monitor with tilt base

¥Power Cord

¥UserÕs Manual

¥CD-ROM

¥Base Stand

¥Cable Holder

English

UserÕs Manual	Power Cord	Base Stand	Cable Holder	CD-ROM	LCD monitor
					Captive type (Video signal cable is
					connected)

*Remember to save your original box and packing material to transport or ship the monitor.

Quick Start

To attach the Base to the LCD Stand:

1.Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).

2.Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand (Figure S.1).

To attach the Cable Holder:

1.Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and slide the Cable Holder downward into place (Figure S.1).

NOTE: Please confirm that the tabs are completely secure.

Stand

Locking Tabs

Base

Cable Holder

		Macintosh Cable
Figure S.1	Figure A.1	Adapter (not included)	Figure A.2

To attach the LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable connected with the monitor to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws.

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

English-3