Contents Quick start, Basics | Radio Shack PRO-433 specification

quick start	4
step 1: installing your scanner	4
step 2: power your scanner	5
step 3: connect your scanner	6
step 4: setting up your scanner	8
step 5: monitoring and scanning	10

the basics	11
your scanner’s controls	12
your scanner’s display	13
replacing the fuse	15

beyond the basics	16
channel-storage banks	16
priority channels	16
chain search	17
service bank search	18
weather search and alert	18
FIPS codes	19
Skywarn	20
Signal Stalker I	21
data skip	22
keytones	23
delay	23
memory lock	23

trunking operations	24
programming trunked frequencies	24
talk group ID	25
AFS Format	28
talk group ID search range (EDACS)	28
Status Bit (S-Bit) Ignore	29
trunk search and scan	30

Page 2

Image 2

Contents

PRO-433 1,000 ch Trunking Desktop/Mobile Scanner Quick Start Beyond the basics Contents Quick startBasics Trunking operations Care ContentsSpecial features Base station Installing your scannerQuick start Vehicle mounting Wall outlet Power your scannerWhen mounting in your dashboard, you will need to Vehicle fuse box, use a certiﬁed installer Vehicle cigarette lighter or power portIf you are not experienced in connecting accessories to Connect your scanner External speaker Connecting an external speaker mutes the scanner’sAntenna Internal speaker Storing frequencies in channels Quick Start Setting up your scannerTurning on your scanner Copying / moving frequencies Searching for frequencies Monitoring Earphones / headphonesQuick Start Monitoring and scanning Scanning Basics Basics Your scanner’s controls Trunk Your scanner’s display PGM Scan Replacing the fuse Channel-storage banks Appears when you activate the priority featureBeyond the basics Priority channels Beyond the Basics Chain search At least one bank must be active. If you disable allBanks, the error tone beeps Weather search and alert Service bank searchIt can take several minutes to search all the service Fips codes Beyond the Basics Skywarn Beyond the Basics Signal Stalker Turn off the data skip feature if it is on Data skip Keytones DelayUsing the memory lock does not prevent the scanner from Memory lock Trunking operations Programming trunked frequencies Talk group ID Storing talk group IDs One of the ten scan lists must always be active. You Scanning a talk group ID listLocking out a talk group ID Cannot remove all of them Locked out Priority talk group ID scanningMonitoring a talk group ID Trunking Operations AFS Format Talk group ID search range Edacs You cannot use partial talk groups in decimal mode Status Bit S-Bit Ignore Trunking Operations Trunk search and scan Type I and hybrid trunked systems Preset ﬂeet maps Programming a ﬂeet map Enter size code S-0 Programming base and offset frequenciesFor Motorolla Type II, instead of selecting the size block Motorola disconnect tone detect function PC programming Special featuresSeconds, T-Err appears and wired programming stops Scanner cloning Special Features Troubleshooting Care To ensure that the scanner clears its memory properly Resetting the scannerService and repair Leave it on until CLEAr stops ﬂashing Speciﬁcations Speciﬁcations UBZZ01345ZA0

Radio Shack PRO-433 Contents Quick start, Basics, Beyond the basics, Trunking operations

Models: PRO-433

Contents

quick start

the basics

beyond the basics

trunking operations