Beyond the Basics

S-S.ALt

Alert settings

S-S.Lit

Back light settings

S-S.PS

Pager screen settings

S-S.OnlY

Mode settings

 

To turn off normal scanning, when Signal Stalker I is

 

running, turn S-S.OnlY setting to ON.

S-S.Int

Voice interrupt settings

 

To keep Signal Stalker I active while receiving an audio

 

signal, set this function to ON. If you turn this function

 

OFF, the scanner does not check signals while receiving

 

an audio signal.

S-S.LOG

............................................................................Logging settings

Set S-S.LOG to ON to scan the log channels along with the normal channels.

4. For other settings, press or to select ON or OFF, then press

E/PGM.

5. Press . /CLR /DELAY to exit the option mode.

6. Press MENU to exit the menu mode.

data skip

Data skip prevents the scanner from stopping on nonmodulated or data signals (such as fax or modem transmissions) during a search or scan.

Data skip does not apply to the air band and weather NOTE search mode, as data signals are not generally found in

these services.

To turn on the data skip feature, complete the following steps:

1. Turn off the priority feature if it is on.

2. Press MENU.

3. Repeatedly press or to display dAtA-S, then press E/PGM.

4 . Press or to select OFF or ON, then press E/PGM.

22

Page 22
Image 22
Radio Shack PRO-433 quick start Data skip