Your scanner’s display, Pgm | Radio Shack PRO-433 specs

The Basics

Number keys

Enter a channel, a frequency, or an ID number.

HAM

Selects the ham band when in service mode.

MRN

Selects the marine band when in service mode.

AIR

Selects the air band when in service mode.

POL

Selects the police band when in service mode.

ALERT

Activates the NWR-SAME weather alert.

CLR /DELAY

Clears error messages, or accesses the delay feature.

E/PGM

Stores frequencies into channels, and programs the trunking frequency, ﬂeet map, and ID memories.

DM/M-LOCK

Lets you set the display brightness, or locks the memory. To set the brightness of the display backlight select BRIGHT, DIMMER or OFF.

or

Searches or scans up and down, or selects options.

HOLD /RESUME

Stops and resumes searching.

your scanner’s display

BANK

Indicates active channel-storage banks (1–10) or talk group ID lists (trunking).

TRUNK

Appears during trunking operations.

P

Indicates priority channels and talk groups.

13

Image 13

Radio Shack PRO-433 quick start Your scanner’s display, Pgm

Contents

Quick Start PRO-433 1,000 ch Trunking Desktop/Mobile Scanner Basics Contents Quick startBeyond the basics Trunking operations Special features ContentsCare Quick start Installing your scannerBase station Vehicle mounting When mounting in your dashboard, you will need to Power your scannerWall outlet If you are not experienced in connecting accessories to Vehicle cigarette lighter or power portVehicle fuse box, use a certiﬁed installer Connect your scanner Antenna Connecting an external speaker mutes the scanner’sExternal speaker Internal speaker Turning on your scanner Quick Start Setting up your scannerStoring frequencies in channels Copying / moving frequencies Searching for frequencies Quick Start Monitoring and scanning Earphones / headphonesMonitoring Scanning Basics Trunk Basics Your scanner’s controls PGM Your scanner’s display Scan Replacing the fuse Beyond the basics Appears when you activate the priority featureChannel-storage banks Priority channels Banks, the error tone beeps At least one bank must be active. If you disable allBeyond the Basics Chain search It can take several minutes to search all the service Service bank searchWeather search and alert Fips codes Beyond the Basics Skywarn Turn off the data skip feature if it is on Beyond the Basics Signal Stalker Data skip Using the memory lock does not prevent the scanner from DelayKeytones Memory lock Programming trunked frequencies Trunking operations Storing talk group IDs Talk group ID Locking out a talk group ID Scanning a talk group ID listOne of the ten scan lists must always be active. You Cannot remove all of them Monitoring a talk group ID Priority talk group ID scanningLocked out Talk group ID search range Edacs Trunking Operations AFS Format Status Bit S-Bit Ignore You cannot use partial talk groups in decimal mode Type I and hybrid trunked systems Trunking Operations Trunk search and scan Preset ﬂeet maps Programming a ﬂeet map For Motorolla Type II, instead of selecting the size block Programming base and offset frequenciesEnter size code S-0 Motorola disconnect tone detect function Seconds, T-Err appears and wired programming stops Special featuresPC programming Scanner cloning Special Features Care Troubleshooting Service and repair Resetting the scannerTo ensure that the scanner clears its memory properly Leave it on until CLEAr stops ﬂashing Speciﬁcations Speciﬁcations UBZZ01345ZA0