Quick Start
4. Select the target bank. The smallest empty channel number flashes over the frequency.
5. | Press or to access the target channel. |
6. | Press E/PGM. If there is no empty channel, the scanner |
| automatically selects the first channel of the bank. |
To cancel the copy or move, press . /CLR /DELAY.
searching for frequencies
You can search for frequencies up or down using direct search.
1. Press and hold SRCH. SRCH appears in the display.
2. (Optional) To set a starting frequency, press HOLD and enter the frequency.
3. Press 
or 
to begin searching up or down the frequencies.
4. (Optional) To avoid unwanted frequencies, you can skip up to 200 specified frequencies during a search. To skip a frequency, press L/O when the scanner finds the frequency.
| • You cannot skip frequencies during a weather service |
NOTES | search. |
• If you skip all frequencies within the search range, the | |
| scanner cannot search. |
| • If you try to skip more than 200 frequencies, the |
| scanner will stop skipping the earliest skipped |
| frequencies. |
To clear a skipped frequency, complete the following steps:
1. Press HOLD/RESUME to stop the search.
2. Select the frequency. L/O appears.
3. Press L/O. L/O disappears.
4. (Optional) To clear all the skipped frequencies, press HOLD/ RESUME, then hold down L/O until the scanner beeps twice.
9
