Programming a ﬂeet map | Radio Shack PRO-433 specification

Trunking Operations

E1P10	Block Code	0	1	2	3	4	5	6	7

	Size	S0	S0	S0	S0	S0	S0	S4	S4

E1P11	Block Code	0	1	2	3	4	5	6	7

	Size	S4	S0	S0	S0	S0	S0	S0	S0

E1P12	Block Code	0	1	2	3	4	5	6	7

	Size	S0	S0	S0	S0	S0	S0	S0	S4

E1P13	Block Code	0	1	2	3	4	5	6	7

	Size	S3	S3	S11	S4	S4	S0	S0	S0

E1P14	Block Code	0	1	2	3	4	5	6	7

	Size	S4	S3	S10	S4	S4	S4	S12	(S12)

E1P15	Block Code	0	1	2	3	4	5	6	7

	Size	S4	S4	S4	S11	S11	S0	S12	(S12)

E1P16	Block Code	0	1	2	3	4	5	6	7

	Size	S3	S10	S10	S11	S0	S0	S12	(S12)

5. Press E/PGM . The scanner return to the previous screen (FLEEt).

When the scanner searches for transmissions, you see NOTE Type I ﬂeet and subﬂeet IDs such as 100-12, 100-9, 000-12,

or 400-8.

programming a ﬂeet map

If no preset ﬂeet maps let you follow complete conversations, then you can program a ﬂeet map.

1. Select the trunking programming mode and the bank you want to change.

2. Pressorto select Type 1 System (E1), then press E/PGM.

3. Pressorto select FLEEt, then press E/PGM. A preprogrammed ﬂeet map appears.

4.	Press	or	until USr appears. Then press E/PGM.
5.	Press	or	to select the size code for the ﬁrst block, then press
	E/PGM. The next available block appears. If you select size

32

Image 32

Radio Shack PRO-433 quick start Programming a ﬂeet map

Contents

PRO-433 1,000 ch Trunking Desktop/Mobile Scanner Quick Start Contents Quick start BasicsBeyond the basics Trunking operations Care ContentsSpecial features Installing your scanner Quick startBase station Vehicle mounting Wall outlet Power your scannerWhen mounting in your dashboard, you will need to Vehicle cigarette lighter or power port If you are not experienced in connecting accessories toVehicle fuse box, use a certiﬁed installer Connect your scanner Connecting an external speaker mutes the scanner’s AntennaExternal speaker Internal speaker Quick Start Setting up your scanner Turning on your scannerStoring frequencies in channels Copying / moving frequencies Searching for frequencies Earphones / headphones Quick Start Monitoring and scanningMonitoring Scanning Basics Basics Your scanner’s controls Trunk Your scanner’s display PGM Scan Replacing the fuse Appears when you activate the priority feature Beyond the basicsChannel-storage banks Priority channels Beyond the Basics Chain search At least one bank must be active. If you disable allBanks, the error tone beeps Weather search and alert Service bank searchIt can take several minutes to search all the service Fips codes Beyond the Basics Skywarn Beyond the Basics Signal Stalker Turn off the data skip feature if it is on Data skip Delay Using the memory lock does not prevent the scanner fromKeytones Memory lock Trunking operations Programming trunked frequencies Talk group ID Storing talk group IDs Scanning a talk group ID list Locking out a talk group IDOne of the ten scan lists must always be active. You Cannot remove all of them Locked out Priority talk group ID scanningMonitoring a talk group ID Trunking Operations AFS Format Talk group ID search range Edacs You cannot use partial talk groups in decimal mode Status Bit S-Bit Ignore Trunking Operations Trunk search and scan Type I and hybrid trunked systems Preset ﬂeet maps Programming a ﬂeet map Enter size code S-0 Programming base and offset frequenciesFor Motorolla Type II, instead of selecting the size block Motorola disconnect tone detect function Special features Seconds, T-Err appears and wired programming stopsPC programming Scanner cloning Special Features Troubleshooting Care Resetting the scanner Service and repairTo ensure that the scanner clears its memory properly Leave it on until CLEAr stops ﬂashing Speciﬁcations Speciﬁcations UBZZ01345ZA0