Keytones, Delay, Memory lock | Radio Shack PRO-433 specs

Beyond the Basics

5. Press MENU to exit the menu mode.

keytones

The keytones feature beeps when you press a button on the scanner. To modify keytone settings, complete the following steps:

1.	Press MENU.
2.	Press or to until bEEP appears in the display, then press
	E/PGM.

3. Press or to select OFF or ON, then press E/PGM.

4. Press MENU to exit the menu mode.

delay

When the delay feature is active, the scanner automatically monitors channel frequency for an additional 2 seconds after a transmission stops before resuming scanning or searching.

To access the delay, press . /CLR /DELAY while the scanner is monitoring a channel, scanning, or searching. DLY appears when the delay is active and disappears when inactive.

Signal Stalker I also has a delay feature. It’s delay time NOTE is 10 seconds. See “Signal Stalker I” for how to program

Signal Stalker I Delay.

memory lock

The memory lock feature protects the scanner from accidental program changes.

To turn on the memory lock, hold down DM/M-LOCKuntil M- LOCK appears. To turn it off, hold down DM/M-LOCKuntil M-LOCK disappears. When the scanner is locked, it beeps an error tone if you try to program a frequency or talk group ID.

	NOTE	Using the memory lock does not prevent the scanner from
	NOTE	scanning channels.
		scanning channels.

23

Image 23

Radio Shack PRO-433 quick start Keytones, Delay, Memory lock, Using the memory lock does not prevent the scanner from

Contents

Quick Start PRO-433 1,000 ch Trunking Desktop/Mobile Scanner Trunking operations Contents Quick startBasics Beyond the basics Care ContentsSpecial features Vehicle mounting Installing your scannerQuick start Base station Wall outlet Power your scannerWhen mounting in your dashboard, you will need to Connect your scanner Vehicle cigarette lighter or power portIf you are not experienced in connecting accessories to Vehicle fuse box, use a certiﬁed installer Internal speaker Connecting an external speaker mutes the scanner’sAntenna External speaker Copying / moving frequencies Quick Start Setting up your scannerTurning on your scanner Storing frequencies in channels Searching for frequencies Scanning Earphones / headphonesQuick Start Monitoring and scanning Monitoring Basics Trunk Basics Your scanner’s controls PGM Your scanner’s display Scan Replacing the fuse Priority channels Appears when you activate the priority featureBeyond the basics Channel-storage banks Beyond the Basics Chain search At least one bank must be active. If you disable allBanks, the error tone beeps Weather search and alert Service bank searchIt can take several minutes to search all the service Fips codes Beyond the Basics Skywarn Turn off the data skip feature if it is on Beyond the Basics Signal Stalker Data skip Memory lock DelayUsing the memory lock does not prevent the scanner from Keytones Programming trunked frequencies Trunking operations Storing talk group IDs Talk group ID Cannot remove all of them Scanning a talk group ID listLocking out a talk group ID One of the ten scan lists must always be active. You Locked out Priority talk group ID scanningMonitoring a talk group ID Talk group ID search range Edacs Trunking Operations AFS Format Status Bit S-Bit Ignore You cannot use partial talk groups in decimal mode Type I and hybrid trunked systems Trunking Operations Trunk search and scan Preset ﬂeet maps Programming a ﬂeet map Enter size code S-0 Programming base and offset frequenciesFor Motorolla Type II, instead of selecting the size block Motorola disconnect tone detect function Scanner cloning Special featuresSeconds, T-Err appears and wired programming stops PC programming Special Features Care Troubleshooting Leave it on until CLEAr stops ﬂashing Resetting the scannerService and repair To ensure that the scanner clears its memory properly Speciﬁcations Speciﬁcations UBZZ01345ZA0