NEC MS125 manual Monitor MultiSync Specifications

Specifications

Monitor		MultiSync® 125™	Notes
Specifications		Monitor
Picture Tube	Diagonal:	21.0 inch	90° deflection, 0.25 mm trio dot pitch,
	Viewable Image Size:	20.0 inch	medium short persistence phosphor,
	Radius:	1730 mm	multi-layered, anti-static screen coating,
			semi-tint screen, Invar Shadow Mask and
			OptiClear® screen surface.
Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms
	Sync:	Separate sync. TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
	Composite sync	Positive/Negative
	Sync on Green:
Display Colors	Analog input:	Unlimited number of Colors	Depends on display card used.
Synchronization	Horizontal:	31 kHz to 96 kHz	Automatically
Range	Vertical:	55 Hz to 200 Hz	Automatically
Resolutions Supported		640 x 480 @ 70 to 188 Hz	Some systems may not support
Resolution based on horizontal and		720 x 400 @ 55 to 160 Hz	all modes listed.
vertical frequencies only		800 x 600 @ 55 to 152 Hz
		1024 x 768 @ 55 to 120 Hz
		1152 x 870 @ 55 to 105 Hz
		1280 x 1024 @ 55 to 89 Hz ..................... NEC cites recommended resolution at
		1600 x 1200 @ 55 to 76 Hz	85 Hz for optimal display performance
Active Display Area	Horizontal:	390 mm/15.4 inches	Dependent upon signal timing used,
(Factory Setting)	Vertical:	293 mm/11.5 inches	and does not include border area.
Active Display Area		406 mm/16.0 inches	Dependent upon signal timing used,
(Full Scan)		305 mm/12.0 inches	and does not include border area.
Power Supply		AC 100 – 240 V, 50-60 Hz
Current Rating		2.5A @ 100 – 240 V
Dimensions		498 mm (W) x 510 mm (H) x 512 mm (D)
		19.6 inches (W) x 20.1 inches (H) x 20.2 inches (D)
Weight		30 kg
		66.1 lbs
Environmental Considerations
Operating Temperature:		0°C to +35°C
	Humidity:	10% to 90%
	Feet:	0 to 10,000 Feet
	Storage Temperature:	-20°C to +60°C
	Humidity:	0% to 90%
	Feet:	0 to 45,000 Feet

NOTE: Technical specifications are subject to change without notice.

9

MS125 Manual.wpc 11 5/7/01, 3:34 PM