1 I N T R O D U C T I O N

This section introduces you to your new MultiSync MT600 LCD Projector, provides a list of materials that comes with your projector and describes the features and controls.

Congratulations On Your Purchase Of The￿MultiSync MT600 LCD Projector

The MultiSync MT600 is one of the very best LCD projectors available today. The multiple LCD panels enable you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, document camera, or even a laser disc player.

You can use the projector on a tabletop or cart, you can permanently mount it on a ceiling*, or you can use MultiSync MT600 LCD Projector to project images from behind the screen. The remote control can be used wirelessly or with a cable, and you can even use the remote control with the IR receiver to operate the

mouse on your PC or Mac. But best of all, the MultiSync MT600 is an NEC LCD projector. That means you can depend on years of reliable performance and crystal-clear presentations!

The features you’ll enjoy include:

•Simple set up and operation.

•A high-performance 250 watt metal halide lamp that delivers 400 lumens (ANSI) and is guaranteed for 2000 hours of ser- vice or six months, whichever comes first.

•The “High Contrast” mode creates a clear image from a docu- ment camera.

•The power zoom control enables you to adjust the image to be between 20 and 300 inches (measured diagonally).

•The “2X-4X” button allows you to double and quadruple the size of the image with a single click of the remote.

•An image can be projected from in front or behind a screen, and the projector can even be installed on the ceiling.

13

Condition

Status

 

 

Blinking Rapidly￿

The projector is overheated. The lamp turns

(4 times a second)

off automatically. Allow the fan to run at least

 

two minutes before unplugging the projector.

 

Then check the filter and clean it if necessary.

 

If there is insufficient ventilation around the

 

projector or if the room where you’re presenting

 

is particularly warm, move the projector to

 

a cooler location. In either case, allow at least

 

five minutes before turning the projector back

 

on. If the problem persists, contact your NEC

 

dealer for service.

 

 

TROUBLESHOOTING 50